Bottom Bracket Tool - BBT-22 - from Park Tool USA

Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup.

Can be used with a 3/8" drive torque spanner, 3/8" ratchet spanner, 32mm spanner, FRW-1 Freewheel Remover Spanner, or 1" spanner.

Note: The BBT-22 was launched in January 2007.

The Park Tool BBT-22 is an updated version of the BBT-2.

The twenty tooth pattern is used on a wide variety of bottom brackets, including models from Shimano®, Truvativ®, Race Face®, FSA®, and others.

The tool clears the oversized spindles of ISIS Drive and Octalink

Instructions for Bottom Bracket removal:

Remove cranks

Fit the BBT-22 tool into the splines of the non-drive side (normally left side as you sit on the bike facing forwards) cup and turn anti-clockwise until removed.

Fit the BBT-22 tool into the splines of the drive side cup and turn clockwise (anti-clockwise for Italian threaded cups) until removed.

Instructions for Bottom Bracket installation / fitting:

Fit the BBT-22 tool into the drive side cup and turn anti-clockwise until tight (clockwise for Italian threaded cups) .

Fit the BBT-22 tool into the splines of the non-drive side and turn clockwise until tight.

Park Tool Reference: BBT-22

About Park Tool :

Park Tool has been manufacturing bicycle specific tools since 1963.

Based in St. Paul, Minnesota, USA, Park Tool is the world's largest bicycle tool manufacturer.

A long-term dedication to quality, innovation, and customer service has made Park Tool the first choice of professional and home bicycle mechanics around the world.

Just visit your local bike shop - chances are that they will be using Park Tool tools for bike service / repair.

Related tags: Bottom Bracket Park Tool