Knog pwr road front bike light 600...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Pair of replacement Brompton brake pad inserts
Brompton 16 inch inner tube This standard Brompton inner tube with...
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton brake pads and holders (pair) These pads will improve braking...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Schwalbe Marathon 16 inch tyre with GreenGuard for Brompton folding...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
This was the Brompton standard 16 x 1 3/8 inch tyre fitted as standard...
Brompton mudguard - no rack version - silver
Knog pwr road front bike light 600 lumens
We have 2 left in stock in stock
Warning: Last few in stock!
Up to 600 lumen front light with 5000mAh power bank
Weighs just 131g
The pack includes:
Front Knog pwr trail 600 light unit with integrated USB power bank
Micro USB cable
Designed by Knog in Melbourne, Australia
Made in China
The official blurb:
PWR Road is a modular bike light. But it's not JUST another bicycle light.
Not only is it a high power headlight, but simply take the product apart and you have much more. A lighthead for other PWR bike and camping lights, plus a PWR Bank to charge devices that is also the battery for all products in the PWR range.
The PWR Road outputs a max 600 lumens, can run for up to 195 hours on Eco Flash mode, uses an elliptical beam for broader road coverage, can be mounted both on top or under the handlebar (mount under your Garmin), or your helmet, incorporates twist mode operation (turn the light on and off twisting the lighthead - no buttons) and gives you the option to program your brightness and runtime through our ModeMaker app.
PWR is an ecosystem of bike and outdoor products designed to share their battery. But, that battery also works as a power bank to charge your devices. PWR Road runs for 2.3 hours at 600 lumens, or up to 195 hours in Eco-flash mode.
Connect lighthead to PWR bank: Insert the two lighthead plug pins into the battery. When connected, your lightheads LED's will flash.
Connect lighthead to sidemount: Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel.
Operation: Once the lighthead and battery are connected, twist the lighthead and hold to turn on, twist and release to change modes.
If your question has not yet been answered here, use the form below to ask something