Bush + Müller 2C dynamo rear light -...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Pair of replacement Brompton brake pad inserts
Brompton 16 inch inner tube This standard Brompton inner tube with...
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton brake pads and holders (pair) These pads will improve braking...
Replacement Brompton non folding right hand pedal (silver) with...
This was the Brompton standard 16 x 1 3/8 inch tyre fitted as standard...
Schwalbe Marathon 16 inch tyre with GreenGuard for Brompton folding...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Brompton mudguard - no rack version - silver
Bush + Müller 2C dynamo rear light - attaches to rear carrier / Brompton bracket
We have 5 left in stock in stock
Warning: Last items in stock!
|Light type||Rear light / reflector|
The B+M 2C is a bracket mounted rear dynamo light with built in reflector
Built in Z reflector for safety when the light is off / has no power / to comply with the highway code
There is a stand light facility - meaning it will stay on for a short while when you stop - at traffic lights etc - so you won't be left in the dark
It has a bracket which fits permanently to the rack (or Brompton reflector bracket) and can connect using 50mm or 80mm widths (Brompton uses 50mm)
Patented lens system creates two wide light areas from two high output LEDs
Rear reflector / light
Nuts and washers (for securing to brackets/rack) - 50mm or 80mm fixing
Dynamo wiring terminator connectot
b + m part number: 326ASK
Made in Germany
Approved for German road traffic regulations
Note: Packaging could change
If your question has not yet been answered here, use the form below to ask something