crankbrothers stamp 7 flat MTB pedal

crankbrothers stamp 7 platform mountain bike pedal - replaces the Stamp for 2017

The Stamp 7 is the new name for the Stamp - now there is a range of them, 2,3,7 and 11 - low number = cheaper / slightly less build quality (if you could ever call crannkbrothers over quality)

Tools required:
For installation:
8mm allen key / hex wrench for installation of pedal
2mm allen key / hex wrench for adjustment of pins
grease (for greasing the pedal threads before installing into the crank arms) 
For servicing:
crosshead screwdriver (to access grease port for servicing)
2.5mm allen key / hex wrench toremove body screws to remove pedal axle

The crankbrothers stamp 7 flat pedal is (as it says in the sales literature) engineered to provide the optimal interface between shoe and pedal. Quite important as you have three contact points to your bike - the grips, the pedals and the saddle (and maybe you stand up sometimes leaving just two contact points).

The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow you, the rider to fine tune the feel.

The outsole profiles of the top mountain bike shoe brands (we read here five-ten) were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.

crankbrothers stamp pedal 7 features

• Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected.
• 13mm external and 11mm internal thin-ness.
• grease port - so you can re-grease without removing the pedal
• 20 adjustable pins per pedal (10 on each side). 
• 8mm in the centre of the pedal and 10mm on the outer edges.
• Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers.
• It performs in even the most adverse conditions out on the trails.
• Small: 100mm x 100mm pedal body footprint
• Large: 114mm x 111mm pedal body footprint
• Available in red or black
• 5 year warranty
• full installation instructions
• small crankbrothers logo sticker included

crankbrothers stamp pedal sizing

• stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
• stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) 

Check out this review of the original crankbrothers stamp pedal on pinkbike

Check out this review of the crankbrothers stamp range on bike radar