Viewed products
The Park Tool BBT-22 is a quality...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton brake pads and holders (pair) These pads will improve braking...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Schwalbe Marathon 16 inch tyre with GreenGuard for Brompton folding...
Brompton yellow rim tape for all Brompton wheels
This replacement Brompton handlebar catch assembly comes complete with...
BBT-22
The Park Tool BBT-22 is a quality workshop tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups.
We have -1 left in stock in stock
25 on order - expected End March 2021
Warning: Last few in stock!
Availability date:
Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup.
Can be used with a 3/8" drive torque spanner, 3/8" ratchet spanner, 32mm spanner, FRW-1 Freewheel Remover Spanner, or 1" spanner.
Note: The BBT-22 was launched in January 2007.
The Park Tool BBT-22 is an updated version of the BBT-2.
The twenty tooth pattern is used on a wide variety of bottom brackets, including models from Shimano®, Truvativ®, Race Face®, FSA®, and others.
The tool clears the oversized spindles of ISIS Drive and Octalink
Instructions for Bottom Bracket removal:
Remove cranks
Fit the BBT-22 tool into the splines of the non-drive side (normally left side as you sit on the bike facing forwards) cup and turn anti-clockwise until removed.
Fit the BBT-22 tool into the splines of the drive side cup and turn clockwise (anti-clockwise for Italian threaded cups) until removed.
Instructions for Bottom Bracket installation / fitting:
Fit the BBT-22 tool into the drive side cup and turn anti-clockwise until tight (clockwise for Italian threaded cups) .
Fit the BBT-22 tool into the splines of the non-drive side and turn clockwise until tight.
Park Tool Reference: BBT-22
If your question has not yet been answered here, use the form below to ask something