Brompton replacement superlight quick release left pedal

Brompton replacement quick release left pedal

As introduced with the T Line Brompton

Note: This is a replacement quick release left hand pedal only for your Brompton

The package contains the following item: 

• A left hand quick release pedal (weight 133g)

Note: Left / Right hand as you are sitting on the bike

Superlight Pedal Fitting instructions

The fit the quick release pedal to the non-drive side:

• Place the bike in the parked position 
• Place the left crank arm parallel and toward the back of the bike to provide access to the back of the crank arm 
• Fit the washer 
• Apply anti-seize or grease to the pedal quick release mechanism tighten to 11.8Nm using a 6mm Hex (Allen) Key 
• Turn clockwise to install and anti-clockwise to uninstall 
• To remove the pedal when not in use, press either side of the pedal quick release mechanism and pull the pedal away from the crank arm

Tools required 

• A 6mm hex (Allen) key
• A torque wrench 

These pedals are as supplied on the T Line Brompton, but are also compatible with the P Line and C Line Bromptons. On the C and P Line Bromptons the pedal holder fits to the rear of the front brake caliper 

Colour: Black 

Size: The platform size of the pedal is 6 x 8 cm

Brompton part number: Q102657

We made this short video to show more detail about the pedals and how to fit / use them