SwissStop Disc 28 C - Shimano XTR /XT / SLX

SwissStop Disc 28 C - Shimano XTR /XT / SLX

A direct replacement for the following Shimano brake pads:

• G05A
• G03A
• G02A
• G03S
• J03A
• J05A
• J02A
• J04C

SwissStop C pads provide smooth power with low noise 

High performance Kevlar, ceramic, brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included

These pads fit the following Shimano Brake Callipers:

• XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985
• XT BR-M8100,BR-M8000,BR-M785
• SLX BR-M7100,BR-M675,BR-M666
• DEORE BR-M615
• ALFINE BR-S700
• BR-RS785
• BR-R785

These pads also fit the following FSA brake callipers:

• K-Force DB-TX-9000
• Afterburner DB-TX-9150

These pads also fit the following REVER brake callipers:

• MCX1 Post Mount

Performance Characteristics (out of 10 - 10 is best 1 is worst)

• Initial bite: 9
• Modulation: 8
• Longevity: 7
• Heat Tolerance: 7
• Noise when dry: 9 
• Noise when wet: 9

Bedding in

Note: These pads should be "conditioned" after installation and before riding - instructions are in the pack

Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times.

Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times.

Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2.

CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.