SwissStop Disc 32 C - SRAM HRD, eTap AXS Gen 1

SwissStop Disc 32 C - SRAM HRD, eTap AXS Gen 1

High performance Kevlar, ceramic, brass and resin composite material.

Provides excellent brake power with minimal effort at the brake lever.

Performance is consistent in both wet and dry conditions and pad life is excellent.

High quality springs included

These SwissStop 32 Endurance pads fit the following SRAM Brake Calipers:

• Red eTap AXS (Gen. 1 'Mono-Bloc' caliper),eTap HRD,Red 22 HRD (B1)
• Force Force 22 HRD (B1),Force 1 HRD
• Rival Rival 22 HRD (B1),Rival 1 HRD
• Apex Apex 1 HRD
• S-700 HRD (B1)
• Level Ultimate,TLM (2016-2019)

Performance Characteristics (out of 10 - 10 is best 1 is worst)

• Initial bite: 9
• Modulation: 8
• Longevity: 7
• Heat Tolerance: 7
• Noise when dry: 9 
• Noise when wet: 9

Bedding in

Note: These pads should be "conditioned" after installation and before riding - instructions are in the pack

Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times.

Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times.

Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2.

CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.