Brompton extra light 16 inch front wheel

This replacement Brompton front wheel has a hollow axle and is secured using an allen bolt (included). The wheel weighs in (according to our scales) at 535g, giving you a saving of 115g over the standard Brompton wheel - perfect for those wanting to lose a bit of weight.

Rim tape and axle fittings are also included.

Brompton part number: QFWSS-XL

Note: The hub has distinct left and right hand sides. This is because the axle protrudes  by a different amount on each side to accommodate the mudguard stay.

It is essential that the wheel is fitted the correct way round.

If not fitted the correct way round, the wheel may not be properly secured and may come loose.

To help you with installation the hub is colour coded with the left side of the hub having a red axle cap. In addition the axle stubs are marked "L" and "R". (That is left and right as you are sitting on the bike facing forwards)

To fit, use the same tab-washers as on the old wheel (note: on some P-type Bromptons, there is a special RH tab washer), but discard (maybe keep for the future?) any plain M8 washers.

Insert the allen bolt through the front axle spacer bush and tab washer, and into the axle from the right hand side. Make sure that the left hand tab washer and wire-form are in place, and screw in the left hand nut and tighten.

These instructions, along with diagram are also supplied with the wheel.

About Brompton :

In 2010 Brompton produced 28000 bicycles (75% for the export Market) and are now the UKs largest bicycle manufacturer.

At the heart of the company is making a bloody good bike - says MD Will Butler-Adams. We don't need to say more.

The Brompton timeline

2012
Brompton launches the H type with a higher ride position and Mini Ortlieb bags 

2010
Brompton receives the Queens award for international trade and Queens award for innovation

2009
Andrew Ritchie receives the Prince Phillip designers prize
Brompton Wide Range Hub (BWR) introduced - with a 302% range
Satin finish introduced across the whole range

2007
Rear frame clip introduced

2005
S-type (sports / straight) and P Type handlebars introduced
Superlight upgrade launched - including alloy headset, titanium forks, rear frame, pedal bolt and mudguard stays.

2004 
Long wheelbase and improved hinge joints introduced 

2002
Brompton 2 sprocket derailleur system introduced

2000
Mark 3 models introduced - better componentry all round

1995
Brompton receives Queens award for export

1987
Brompton goes into full time production

1981
First 30 Brompton bikes produced to order

1976
Brompton Bicycle is registered as a limited company

1975
Andrew Ritchie begins designing a folding bike in his flat, overlooking the Brompton Oratory 

 

Related tags: Wheel Brompton