Viewed products
Brompton rear dynamo light - Solo by...
16 / 18 inch inner tube with Schrader / car type valve, made by Schwalbe
The Marathon Plus 16 inch tyre - helping to make punctures are a distant...
Brompton sprocket stack for Brompton bikes with a 6-speed Sturmey Archer...
The Brompton front carrier block / luggage mounting block allows you to...
100 link chain for 2 or 6 speed Brompton with 50T front chainring, or 3...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton yellow rim tape for all Brompton wheels
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
QVDYNRLAM-SOLO
Brompton rear dynamo light - Solo by Spanninga
We have 2 left in stock in stock
Warning: Last few in stock!
Availability date:
Brompton Spanninga Solo rear light - new for late 2018 - as supplied with the new SP SV8 hub dynamo kit
This rear dynamo light is also compatible with the previous Brompton hub dynamo systems from Shimano and SON
This Brompton rear dynamo light (made by Dutch company Spanninga) can be mounted to all Brompton folding bikes - with or without a rack (generally it will be a replacement for your existing rear dynamo light and use the existing bracket)
It uses the standard 50mm spacing on the bracket (if you want to fit to a non-Brompton bike it can also be changed to fit 80mm spacing)
The rear light has a "stand light / safe stop" function which means it stays on for approximately 4 minutes after you stop (powered by a capacitor) - to improve your visibility when stationary at traffic lights for example. (Some station masters don't like this functionality as it means you can be on a station platform with a red light)
The "stand light" function provides a benefit over the old fashioned dynamo lights which went out as soon as the bike stopped as it was not longer receiving power
The Brompton Spanninga Solo rear dynamo light also has a built in reflector - so will give some visibility even when the light is not on
The light replaces the reflector - so you can use the existing brackets
The light is connected to the power of the hub dynamo via the front light (the front light connects to the dynamo and the rear light connects to the front light)
Brompton Q part code: QVDYNRLAM-SOLO
Brompton part number: 9020454
New Brompton Q code: Q100206
We made this short video on how to install the Brompton SP SV-8 hub dynamo system - which (as of 2019) comes as standard with this Spanninga Solo rear dynamo light
If your question has not yet been answered here, use the form below to ask something
Origin | France |
Comm Code | 87149990 |
Power | Dynamo |
Light type | Rear light / reflector |