Brompton G Line Rear Frame Dropout - non-drive side

Brompton G Line Rear Frame Dropout - non-drive side

This is the non-drive size manual G line frame dropout:

• 8 speed Brompton G Line 

In the packet is:

• the non-drive side rear frame dropout
• 2 x conter sunk nuts
• 2 x counter sunk screws 

Fitting instructions:

Firstly remove the rear wheel: 

• Disengage the chain tensioner to loosen the chain. 
• Remove the rear wheel by removing the bolts using a 16mm Spanner
• Remove the non-drive side rear frame dropout using a 5mm Allen (hex) key and a CNW-2 (or equivalent) 

Installation instructions: 

• Place the non-drive side rear frame dropout in place
• Insert the counter sunk nut in the hole on the inside of the rear frame dropout. 
• Screw the counter sunk screw into the counter sunk nut
• Then tighten to 5Nm.

Brompton Q part code: Q103748

Introduced by Brompton in 2024 with the G Line 8 speed bike

Please note this is not compatible with the G Line electric, or the A, C, P or T line Brompton bicycles