Viewed products
This is a shortened length steel...
The Marathon Plus tyre in 16 inch Brompton size
Brompton sprocket stack for Brompton bikes with a 6-speed Sturmey Archer...
100 link chain for 2 or 6 speed Brompton with 50T front chainring, or 3...
The Brompton front carrier block / luggage mounting block allows you to...
Replacement Brompton non folding right hand pedal (silver) with...
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
Brompton 98 link replacement chain for 3 speed Brompton with a 50 tooth...
QSP-6P
This is a shortened length steel seatpost / pillar for a Brompton folding bicycle.
Colour: Silver (chrome)
We have 0 left in stock in stock
Currently sold out!
Warning: Last few in stock!
Availability date:
This seatpost has been made for people who find the standard length seatpost too long. It is 6cm shorter than the standard length.
Length: 47.5cm / 18.7 inches
The Brompton seat post is available in 3 lengths and two colours
This is manufactured by Brompton and then shortened by Kinetics for us.
(In the early days of Brompton they used a titanium seatpost, then later there was also an aluminium seatpost available - these have now been discontinued - titanium due to supply issues and aluminium due to long term quality issues - the coating discoloured over time)
The Brompton seatpost has a 31.6 mm diameter through most of its length (with a flange at one end to stop it raising too far and a narrower end for the saddle to attach to)
The seatpost is installed on the Brompton from underneath (the flange at the bottom stops the seatpost being raised too far)
Remember: Never lubricate the seatpost
We made this short video on how to remove and re-install a seatpost on your Brompton folding bike
If your question has not yet been answered here, use the form below to ask something
Origin | TAIWAN |
Comm Code | 87149990 |