Viewed products
Introduced in 2013, this Brompton...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
The Marathon Plus 16 inch tyre - helping to make punctures are a distant...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton yellow rim tape for all Brompton wheels
Brompton brake pads and holders (pair) These pads will improve braking...
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
QRIM-28-AGL
Introduced in 2013, this Brompton double wall wheel rim (size 16 x 1 3/8" or ETRTO 349) has 28 spoke holes which are drilled at an angle for extra strength.
Note: For use on rear Brompton (Sturmey Archer or SRAM) hub gear wheels only.
We have 17 left in stock in stock
Warning: Last few in stock!
Availability date:
Brompton 16 inch / ETRTO 349 bicycle wheel rim, double wall, angle drilled with 28 holes.
Rim ERD is 328
Brompton replacement wheel rim for rear hub geared wheels (Sturmey Archer and SRAM/Sachs) only.
Note: For use only with an internal-geared rear hub such as:
Brompton Sturmey Archer BSR (Standard ratio)
Brompton Sturmey Archer BWR (Wide ratio)
Sachs/SRAM 3/6 speed
Sturmey Archer sprinter
Sturmey Archer S-RF3
Note (another one): If you are changing from a single wall rim to a double wall rim then you will require different spokes to your existing ones.
Valve hole is drilled to accept 8mm schrader / car type valves.
Now (as at Jan 2024) also known as the option 2 rim (Option 1 being the aero rim)
Note: Rim tape is not included - you should use Brompton yellow rim tape - Q part code QRIMTAPE-DW
Brompton 2020 Q part code: Q100036
Brompton Q part code: QRIM-28-AGL
Brompton part number: 9027170
Thin walls ?
Fitted one of these just a year ago and the wals have split already, the walls appear to be really thin and its expensive to build the wheel again. I have to buy another but the original one lasted 3 yesrd plus.
Failed after two years
When pumping tyres to the recommended 90 PSI the edges of the rim pushed outwards and the rim split at the join. (This after 2 years of use) Only happened on the old style rim after 7 years. Not any option that I can see but get a new one and keep tyre pressure lower.
Nice rim
Took a couple of goes to match the angled holes with the required lacing pattern. But once tightened up and trued it runs very well.
If you are replacing an old single wall rim, don't forget the spokes are a slightly different length and you will need new rim-tape.
Much better than the old Brompton rims
Super rapid deliver from BB, as usual!
If your question has not yet been answered here, use the form below to ask something
Origin | Germany |
Comm Code | 87149990 |
Colour: | Silver |
Front / Rear | Rear |
Rim type | Double wall AGL |