This is a single / two speed Brompton...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
Pair of replacement Brompton brake pad inserts
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Brompton yellow rim tape for all Brompton wheels
Brompton brake pads and holders (pair) These pads will improve braking...
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
This is a single / two speed Brompton rear wheel (to get two speed you need a derailleur) - new 2013 double walled rim model.
Yes - the same wheel is used for both - it's the choice of sprockets which determines the number of gears.
We have 2 left in stock in stock
Warning: Last few in stock!
Brompton 1 or 2 speed rear wheel for all models of Brompton folding bikes complete with rim tape and fixings
The same wheel is used for the Brompton single and two speed rear wheel.
A different stack of sprockets / spacers is required based upon which configuration you need for the weel.
In addition, you will need wheel nuts - they are not supplied - as you could potentially use the old ones if you are replacing the same wheel type. The wheel nuts for the single / two speed Brompton rear wheel have the code QRW2NB.
This wheel (hub) uses Shimano style splines for the sprockets - so with the correct spacers / chain length you could use different sprocket sizes if required. Though as standard the single speed uses 12T and the two speed uses a 12T / 16T combination.
Brompton Q part code: QRW2SS
Brompton part number: 9025022
The rim is a double wall straight drilled rim and has 28 Spokes
The spokes (in case you need spares) are QSPOK-151-DB-14G - Double butted with two cross lacing
Valve hole designed for 8mm Schrader / car type valve
The Brompton two speed hub uses:
6900-2RS in the non-drive side
6901-2RS in the drive side
And in the freewheel body:
3 Question(s) answered - see below
If your question has not yet been answered here, use the form below to ask something