Brompton P Line 4-speed Rear Wheel

Brompton Superlight Advance 4-speed Rear Wheel for P Line with Ryde Rims

This is a the superlight Advance rear wheel as used on the Brompton P Line

This wheel was introduced in early 2022, it has the standard Brompton Ryde rims, so takes a Schrader / car type valve. 

It has 28 double butted spokes and an aluminium hub body and a 4 speed free hub body, the rear wheel is undone using an Allen (Hex) key

The Brompton rear wheel size is 16 x 1 3/8 - ISO/ETRTO 37-349 (although really that's the default tyre size - the wheel takes tyres with a diameter 349mm)

Tools required for removal:

• 5mm Allen key 

Removing the rear wheel:

• Place the bike in the stand, fold the rear end and remove the tension from the chain by disengaging the sprocket from the chain.
• Use the 5mm Allen key to loosen the skewer, avoid the skewer nut from turning. remove the skewer. 
• Deflate the tyre and let it pass through the brake calliper

Tools required for fitting: 

• 5mm Allen key
• Torque wrench

Fitting the rear wheel:

• Ensure it is the correct orientation
• Seat the chain on the cassette
• Insert the skewer and fit the skewer bolt
• Tighten to 7NM using the torque wrench 
• re-engage the chain tension 

New for 2022

The Brompton rear wheel is laced in a single cross laced style  

The weight of the wheel is approx 614g 

Brompton Q part code: Q102998

Note - this wheel would fit a T Line, if you wanted to change to Schrader car type valves, but will not fit the C or A Line Brompton Bikes 

If you need to replace the spokes yuo will need Q102674 - QSPOK-141-DB-14G-BK