Rechargeable front bicycle light from...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Pair of replacement Brompton brake pad inserts
Brompton 16 inch inner tube This standard Brompton inner tube with...
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton brake pads and holders (pair) These pads will improve braking...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Brompton yellow rim tape for all Brompton wheels
Schwalbe Marathon 16 inch tyre with GreenGuard for Brompton folding...
This replacement Brompton handlebar catch assembly comes complete with...
Rechargeable front bicycle light from CatEye - AMPP1100 (HL-EL1100RC)
1100 lumens - USB rechargeable
We have 2 left in stock in stock
Warning: Last few in stock!
CatEye AMPP 1100 (HL-EL1100RC) rechargeable front light features:
The 1100 lumen AMPP1100 features five modes: High, Middle, Low, Daytime Hyper-Constant and Flashing, these have the following stated lumens and durations:
|Daylight Hyper-Constant||6.5h||400 / 1100|
* The factory-loaded battery life might be shorter than the specification above.
* Design and specifications are subject to change without notice.
This rechargeable light charges use the micro-USB cable (included and takes between 3 - 5h (USB2.0) to charge. It has a battery indicator with three power levels: Blue above 50%, yellow 30 - 50% and red less than 30%
Technical specifications as follows:
Battery: Li-ion rechargeable battery (7.4v - 2500mAh)
Dimensions: 48 x 105 x 34mm
Weight: 200g (light and battery)
Light source: High Intensity white LED x 2
Recharge / discharge number of times: about 300 times (until the rated capacity drops to 70%)
The light turns on / off with a double click to high mode, and a single press cycles between modes, the light has a mode memory. There is excellent side visibility and this light has CatEye's wide beam OptiCube lens technology.
The light comes with a FlexTight Bracket to fit handlebars with a diameter of 22 - 35mm, and is also compatible with frame mounted adaptors (not included). The AMPP1100 has an improved release button which is made easier to remove the light from the bracket.
If you have lost your Volt 400 from your Brompton, this light will fit onto the bracket. If you want to fit to a Brompton on you will need:
a replacement dynamo lamp bracket only (code: Q101219 reference: QVBKTFLAMDYN-LED) used in combination with
a CatEye center fork light bracket (#5342440) - this is just for the CateEye adaptor and will not fit without the correct Brompton bracket (we have tried)
If your question has not yet been answered here, use the form below to ask something