Viewed products
Cateye AMPP 400S front light -...
16 / 18 inch inner tube with Schrader / car type valve, made by Schwalbe
The Marathon Plus 16 inch tyre - helping to make punctures are a distant...
Brompton sprocket stack for Brompton bikes with a 6-speed Sturmey Archer...
The Brompton front carrier block / luggage mounting block allows you to...
100 link chain for 2 or 6 speed Brompton with 50T front chainring, or 3...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton yellow rim tape for all Brompton wheels
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
HL-EL084S RC
Cateye AMPP 400S front light - rechargeable
We have 2 left in stock in stock
Warning: Last few in stock!
Availability date:
The Cateye AMP 400S is new for 2024 - and is very similar to its predecessor the AMPP 400 except it now has a USB C charging port instead of mini USB - so no more breaking it by putting in the charger the wrong way around
Cateye AMPP 400S front light - rechargeable front light features:
The 400 lumen AMPP400S features five modes: High, Middle, Low, Daytime Hyper-Constant and Flashing, these have the following stated lumens and durations:
Mode | Approx. duration | Lumens |
High | 2h | 400 |
Middle | 4h | 200 |
Low | 8h | 100 |
Daylight Hyper-Constant | 6h | 400 / 100 |
Flashing | 60h | 100 |
* The factory-loaded battery life might be shorter than the specification above.
* Design and specifications are subject to change without notice.
Charging takes approx. 4h (1A) - 8h (0.5A) to charge. It has a battery indicator, the power button goes red when the battery has less than 20% charge.
The light turns on / off with a single hold, double click changes into high power mode, and a single press cycles between modes, the light has a mode memory. There is excellent side visibility and this light has CatEye's wide beam OptiCube lens technology.
The light comes with a FlexTight Bracket to fit handlebars with a diameter of 22 - 35mm, and is also compatible with frame mounted adaptors (not included). The AMPP400 has an improved release button which is made easier to remove the light from the bracket.
Cateye AMPP 400S (HL-EL084S RC) front light weighs 106 grams
If you have lost your Volt 400 or AMP500 (or just want a spare) from your Brompton, this light will fit onto the Brompton bracket. If you want to fit to a Brompton on you will need:
a replacement dynamo lamp bracket only (code: Q101219 reference: QVBKTFLAMDYN-LED) used in combination with
a CatEye center fork light bracket (#5342440) - this is just for the CateEye adaptor and will not fit without the correct Brompton bracket (we have tried)!
If your question has not yet been answered here, use the form below to ask something
Origin | China |