Viewed products
Intense spare part: Intense cone...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
The Marathon Plus 16 inch tyre - helping to make punctures are a distant...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton yellow rim tape for all Brompton wheels
Brompton brake pads and holders (pair) These pads will improve braking...
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
410009
Intense spare part: Intense cone adjuster bolt - M6 x 22mm
We have 4 left in stock in stock
Warning: Last few in stock!
Availability date:
This cone adjuster bolt is used in conjunction with the expander bolt and cone adjuster and is used to mount the Lower box
Note: This is the expander cone adjuster bolt only - you may also need the expander bolt, cone adjuster and main pivot bearing caps if you are replacing everything - see the list of kits below
If you look at the attached manual for the 951 EVO you can see the location of the cone expander bolt in the exploded BOM diagram
Tools required:
5mm Allen key (to remove / install cone adjuster bolt)
Torque wrench
Note: The cone adjuster bolt should be tightened with a 5mm Allen key to 14Nm
This Intense cone adjuster bolt is used on the following Intense bikes:
Intense 951
Intense Primer - Standard frame (On the SL - lightweight frame the titanium version - 410032 - is used instead)
Intense Tracer 275 alloy 2015+
Intense Tracer T275 carbon
Intense Tracer 2nd generation carbon (introduced in 2017 as part of the 2018 range. On the SL - lightweight frame - the titanium version - 410032 - is used instead)
Intense Uzzi 275 - introduced in 2016
Intense Carbine 29 -2014 onwards
Around 2019/2020 Intense started to introduce some maintenance / hardware kits - this bolt is included in the following kits
Kit part code | Kit Name |
IT340201 | Intense Primer/Recluse/Spider/ACV Lower Link Hardware Kit |
IT340348 | Intense Lower link hardware kit for alloy bikes from 2010 - 2014 |
If your question has not yet been answered here, use the form below to ask something