Viewed products
Intense spare part: Intense main...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton brake pads and holders (pair) These pads will improve braking...
Replacement Brompton non folding right hand pedal (silver) with...
This was the Brompton standard 16 x 1 3/8 inch tyre fitted as standard...
Schwalbe Marathon 16 inch tyre with GreenGuard for Brompton folding...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
No rear rack, no rear (bottle) dynamo and need a replacement Brompton...
130791
Intense spare part: Intense main pivot expander bolt - black - coarse thread
(Please check your model from the list below)
Note: Picture shows complete assembly
We have 0 left in stock in stock
This product is no longer available
Warning: Last items in stock!
Availability date:
This Intense spare paty - coarse thread expander bolt is used to mount the Lower box link for newer model Intense - please check the below list for compatibility.
This is the coarse thread expander bolt (version 3) earlier bikes use a fine thread bolt.
Note: This is the expander bolt only - you may also need the cone adjuster, cone adjuster bolt and main pivot bearing caps if you are replacing everything.
Two of these bolts are used - one for the top and the bottom of the lower link.
This pivot expander bolt is for the following Intense frames:
Intense Tracer 275 Alloy (2015+ only)
Intense Tracer 275 Carbon
Intense Tracer 2nd generation carbon (introduced in 2017 as part of the 2018 range)
Intense Carbine 29
Intense Primer 29 - Tighten to 7Nm, 3 are used in total on the Primer 29
Intense Spider 29C
Intense Spider 275
Intense Uzzi 275
The part is now stamped with part number: 130791
Previously known as: 130130
Should be tightened to 7 Nm with an 8mm allen key
Colour: Black
If your question has not yet been answered here, use the form below to ask something