Renthal Revo-F Flat Pedals, CNC Alloy Flat pedal, 100x104mm - Black

Renthal Revo-F Flat Pedals, CNC Alloy Flat pedal, 100x104mm - Black

Renthal claim these are the new flat pedal of choice, with patent pending internals, they have been designed to be home serviceable and to wear! They really do provide great grip. believe us we are them on our bikes! 

The main body of the Revo-F is made from forged 6061 aluminium. The pedal is then fully CNC machined, to remove as much material as possible. To improve rock strike performance, the front face of the pedal has been kept smooth, without any cut-outs. This allows the pedal to slide over rocks, rather than grabbing them.

The pedals feature a two-axis concave pedal body, and a useable pedal platform, to give the highest level of support and control. The deep concave profile is achieved whilst still retaining a thin outer depth of just 18mm.

The length of  pins can be varied to your needs (or for the holes on your shins :). The Revo-F pedals come factory-fitted with ten 5.5mm height pins per side. Supplied with the pedals are a further forty pins and forty washers. Using a combination of these, the pin height can be adjusted from 5.5mm to either 4.5mm, 3.5mm or 2.5mm, making them one of the most tuneable pedals available. Additionally, all the pins are screw-through type, so can be easily removed if damaged through impact.

Internally the pedal body spins smoothly around a high-grade, forged, machined and precision-ground chromoly axle. The patent pending axle system,  allows full home servicing, using standard tools, a 6mm and 8mm hex-key, a standard 8mm socket, a torque wrench and a mallet. The unique system uses the axle to both remove and re-install the bushing. The bearings are also pressed into place, using the pedal internals.

Inboard, they spin on an extra-wide Igus bush, sealed with a full-contact wiper seal. Outboard there are three cartridge bearings. Two smaller bearings and a larger bearing in the outermost location, sealed with an end-cap O-ring. Adding to the durability of the bearings is the full-length axle. Mounting the bearing at the outer edge of the pedal gives them the best support, to protect them from damage in a rock-strike incident.

Key Specifications summary:

• Concave platform. L-100mm x W-104mm
• Ten pins per side
• Adjustable pin length. 2.5mm to 5.5mm in 1mm increments 
• Three outboard cartridge bearings
• Extra wide inboard IGUS bush
• Fully sealed - Inboard full contact lip-seal. Outer O-ring seal
• Home serviceable, with Renthal patent pending axle system
• Forged and CNC machined 6061 aluminium pedal body
• High-grade chromoly axle
• weight: approx 488g

Colour: Black also available in Gold