Brompton Superlight Front Wheel Axle + Fittings - T and P Line

Brompton Superlight Front Wheel Axle + Fittings - T  and P Line

Axle fitting set for the Brompton Superlight Front Wheel Axle + Fittings - P and T Line (it just does not have the hook)

This is not compatible with the Brompton A or C Line bicycles (unless fitted with the superlight Advance wheel)

Tools required for removal:

• 4mm Allen key / hex wrench

To remove: 
Unscrew the skewer using the 4mm Allen key, and move the hook (with integrated axle nut) 

Tools required for installation:

• 4mm Allen key / hex wrench
• Torque wrench 

The insert:
Insert the skewer through the skewer cone and through the front wheel, align with the hook
Make sure that the raised tab on the hook is aligned with the hole on the fork
Tighten to 7Nm using a torque wrench and 4mm Allen key

Brompton Q code: Q102680

It is vital that you follow the correct procedure and tighten correctly otherwise the front wheel may not be fixed in correctly! 

If you need the front hook for the T Line then you need par code Q102679