Light brackets for Brompton - no rack version

Brompton light / reflector bracket - no rack

About the mounting brackets (light not included):

The mounting bracket is the same for the light as the one used for the reflector. So if you are just replacing the reflector with the light, you don't need a new bracket (unless you want a more shiny one!)

If you don't have a rack - then you will need this "No rack" bracket. you should only need this bracket if:
a/ You have lost the bracket (which involves removing the brake caliper)
b/ You are removing your rack
c/ You have a very old Brompton with the older style mount and wish to fit a current Brompton rear light / reflector 
d/ something else? (answers on a postcard please) 

Dimensions: The distance between the two mount holes is 50mm - this corresponds to the screws used on the Spanninga / Brompton rear light / reflector

The 50mm spacing is also used by many other light manufacturers (e.g. bush and muller)

The download (near the bottom of the page) shows how the bracket mounts to the light / reflector

Brompton part number history (they sometimes change)

Brompton 2020 Q part code: Q101212 - in 2020 Brompton implemented a new part coding system
Brompton Q part code: QVBKTRLAM-NR
Brompton part number: 9014071