The Brompton Pentaclip is used to...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
Pair of replacement Brompton brake pad inserts
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Brompton yellow rim tape for all Brompton wheels
Brompton brake pads and holders (pair) These pads will improve braking...
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
The Brompton Pentaclip is used to secure a rail saddle to the Brompton seatpost - in Black
It fits all Brompton seatposts (Standard length, extended length, telescopic and the discontinued titanium and aluminium)
We have 13 left in stock in stock
Warning: Last few in stock!
The Brompton Pentaclip is designed by Brompton for connecting rail saddles (most saddles are like this) To the Brompton seatpost.
Note: This is the BLACK edition pentaclip - it's black (though the bolt and washers are still silver). In 2019 the wording Brompton on the back of the Pentaclip was replaced with an image of a Brompton.
It can handle saddles with a rail spacing of 43 mm (centre to centre) and a rail diameter of 7 mm, though it can also cope with a reasonable variation in these dimensions. If the saddle’s rails are closer together the pentaclip may feel stiff when the angle is adjusted.
As well as connecting the saddle to the seatpost, the Pentaclip also allows for adjustment of the saddle. By losening the pentaclip the saddle can be slid forwards to reduce the reach required to the handlebars or backwards to increase reach.
In addition, the Pentaclip can be turned "upside-down" to give about an extra inch / 2cm of saddle height.
Weight: we make is 108g (on our scales)
The Pentaclip / saddle need to be removed in order to remove the seatpost.
Fitting instructions for the Pentaclip are included.
Tools required: 5mm allen key / hex wrench (such as the Park Tool PH-5)
Brompton 2020 Q part code: Q100032
Brompton Q part code: QPENTACLIPA-BK
Brompton part number: 9001019
We made this short video showing how the Brompton Pentaclip works and how to disassemble / re-assemble it
2 Question(s) answered - see below
If your question has not yet been answered here, use the form below to ask something