Viewed products
Need to remove a crank? Is it the...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton brake pads and holders (pair) These pads will improve braking...
Replacement Brompton non folding right hand pedal (silver) with...
This was the Brompton standard 16 x 1 3/8 inch tyre fitted as standard...
Schwalbe Marathon 16 inch tyre with GreenGuard for Brompton folding...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
No rear rack, no rear (bottle) dynamo and need a replacement Brompton...
CWP-7
Need to remove a crank? Is it the square holed type or Shimano Octalink / ISIS? If yes, then the CWP-7 from Park Tool could be the tool you are looking for.
Do it properly - use this tool to allow easy removal and avoid possible damage to your cranks or bottom bracket.
We have 4 left in stock in stock
Warning: Last items in stock!
Availability date:
This tool can be used on both square taper type cranks (like those on a Brompton) as well as Octalink / ISIS style cranks - so saves you from having two tools (such as the CCP-22 and CCP-44)
The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms.
The CWP-7 is made for the 22 x 1mm threading in the common cranks.
Weight: 0.5 lbs
Park Tool Reference: CWP-7 / CWP-7C (The C means it comes on a piece of card)
If your question has not yet been answered here, use the form below to ask something