Hope Mount A Post Cal to IS (Front 160mm / Rear 140mm) Silver

One of a wide selection of brake caliper mounts to fit perfectly with Hope brake systems

Most of the Hope mounts are available in a choice of black or silver (this one)

Brake mounts are machined from T6 2014 alloy

The brackets are designed only for the purpose stated

The mounts is supplied with bolts for mounting to frame/fork

Colour: Silver
Made in: Barnoldswick, England, United Kingdom

Post Mount has 2 x M6 threaded holes - they are at a distance of 74.2mm apart (hole centre to hole centre)
IS - International Standard has 2 x 6mm holes - there are at a distance of 51mm apart (hole centre to hole centre)
Flat Mount Front has 2 x M5 threaded holes - they are at a distance of 70mm apart
Flat Mount Rear has 2 oblong holes for M5 screws - they are at a distance of 34mm apart

Post Mount tab position varies - so it will work with different diameter rotors from 140mm to 203mm. Post Mount is very common on MTB forks and the back of most MTB frames

IS can still be found on old forks but is more common on frames (IS rear)

Flat mount is a road and gravel bike standard