Integrated right hand crank and...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Brompton 16 inch inner tube This standard Brompton inner tube with...
Pair of replacement Brompton brake pad inserts
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Replacement Brompton non folding right hand pedal (silver) with...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
Brompton yellow rim tape for all Brompton wheels
Brompton brake pads and holders (pair) These pads will improve braking...
Pair of replacement cartridge brake pad inserts from Fibrax - compatible...
This replacement Brompton handlebar catch assembly comes complete with...
Integrated right hand crank and Brompton 44 tooth Chainwheel - 3/32 inch
This is the pre-2013 integral model (chainwheel and crank are all fixed as one complete assembly)
We have 0 left in stock in stock
Not currently available
Warning: Last few in stock!
This 44 tooth "fixed" chainwheel / right hand (as you sit on the bike) crank fits all Brompton bicycle models built prior to 2013.
|Note: Discontinued in 2016 / replaced by the "Spider" crankset introduced on 2013 model Bromptons|
This item was finally discontinued in 2016, you should replace both the crankset and bottom bracket if yours needs replacing (the bottom bracket is slightly different to the old ones):
This pre-2013 crankset attached to an ISO standard square type spindle as used on the FAG bottom brackets supplied by Brompton.
Complete with chain guard and crank cap.
Changing from the standard 50 tooth chain wheel used on the standard 3 / 6 speed Brompton to this 44 tooth chain wheel should reduce the gear ratio by 12% - making going up hill easier! (you would also need to remove 2 links from your chain)
CCP-22/CWP-7 - Crank puller or equivalent tool
Small flat head screwdriver (to remove cap on crank)
14mm socket (or CCW-5) to undo the bolt holding the crank in place
Grease (such as PPL-1 from Park Tool)
For removal / fitting instructions, please check out this link from Park Tool
Colour: Silver (with Brompton logo on crank arm), with black plastic chain guard
Brompton Q part code: QCW-FX-44
Brompton old (pre 2013) Q part code: QCW44
Brompton part number: 9020041
1 Question(s) answered - see below
If your question has not yet been answered here, use the form below to ask something