This was the Brompton standard 16 x 1...
16 / 18 inch inner tube with Schrader / car type valve, made by...
Pair of replacement Brompton brake pad inserts
Brompton 16 inch inner tube This standard Brompton inner tube with...
With this Marathon Plus 16 inch tyre, punctures are a memory Our best...
The Brompton front carrier block / luggage mounting block allows you to...
Brompton brake pads and holders (pair) These pads will improve braking...
Replacement Brompton non folding right hand pedal (silver) with...
This was the Brompton standard 16 x 1 3/8 inch tyre fitted as standard...
Schwalbe Marathon 16 inch tyre with GreenGuard for Brompton folding...
Brompton sprocket stack for Brompton bikes with a 6 speed Sturmey Archer...
Brompton 100 link replacement chain for 2 or 6 speed Bromptons with 50T...
No rear rack, no rear (bottle) dynamo and need a replacement Brompton...
This was the Brompton standard 16 x 1 3/8 inch tyre fitted as standard at the factory - until 2017, when was phased out with the 2018 model bikes
Now replaced by the Schwalbe Marathon Racer 16 inch tyre
We have 0 left in stock in stock
This product is no longer available
Warning: Last items in stock!
With reflective sidewall strip fir side visibility when riding at night - ETRTO size 37-349
This has been the standard tyre supplied with all new Brompton folding bikes since 2010, but in 2017 is being phased out. It will be replaced with a Marathon Racer - expected early 2018. Until then Brompton are fitting the Schwalbe Marathon at no extra cost
In 2013 it was changed slightly.The tyre is now all black (instead of black and grey), and the green label (it was often referred to as the "Brompton Green tyre") is gone.
The Brompton wheel size is 349 (this is the diameter of the bead seat of the rim, where it sits on the shoulder inside the rim if you like)
This Brompton tyre size is 16 1 3/8 " or ETRTO/ISO size 37-349
The Kevlar lining underneath the tread helps to reduce the chance of getting a puncture.
The reflective side wall on the tyre will help improve your visibility - especially to cars approaching you from the side and as you pull out of or wait at junctions.
Our recommended inner tube for this tyre is the Schwalbe AV4, Brompton supply the QTUB as standard. (The main differences are that the AV4 is lighter and has a rim nut to secure the valve in place - most useful when inflating the tyre from flat or wheeling the bike when you have a puncture)
Tyre pressures for the Brompton kevlar tyre:
Front: 75 to 90 PSI (max 100 PSI / 6.8 bar)
Rear: 85 to 100 PSI (max 100 PSI / 6.8 bar)
Note: These Brompton technical videos may be useful in your tyre replacement task:
Brompton Q part Code: QTYRBKREF
Brompton part number: 9026043
Made in: Taiwan
Not sure if this is the right Brompton tyre for you - check out our blog post here for a list of all options
Sorry - only available for shipping to European Union / European Economic Area Countries
If your question has not yet been answered here, use the form below to ask something